Outerwear

• Fabric: 100% Polyester, Stain-Resistant Finish, 5.5 oz
• 300D Oxford Weave with PU Coating
• Lining: 100% Polyester, 2oz
• 2" Silver Reflective Tape
• Pack Away Adjustable Hood
• Elasticated Storm Cuffs
• Quilt Lined
• Pockets: 1 cell phone under stormflap, 2 chest with zippers & 2 lower patch with flaps
• Double Stormflap with 2-Way Zipper & Snap Closure
• Side Zipper Leg Opening for Easy Access
• Mic Tab
• Contrast Panel for Protection against dirt
• Waterproof with Sealed Seams
• ANSI/ISEA 107-2015 TYPE R CLASS 3

The S485 Contrast Coverall is designed to be completely practical and safe in the worst of cold and wet conditions. The quilted liner with 170g wadding insulation gives extra warmth, elasticated waist for a comfort fit, inner ribbed cuffs keep out drafts, zipped ankles aid donning the garment. Also features 4 cargo pockets and a radio loop.

Meets EN ISO 20471 Class 3 for hi visibility, EN343 Class 3:1 for weather resistance and N342 Class 3 for cold store clothing. Outer Fabric: 100% Polyester, 300D Oxford Weave with a Stain Resistant finish, PU Coated 190g, taped seams. Lining: Nylon 60g/Wadding 170g.

Perfect for law enforcement, fire police or traffic control 

Meets ANSI 107 Class 3 Standards with 2” Reflective Tapes around the Torso & Sleeves & across the shoulders.

• • Waterproof fluorescent lime-green 300D polyester oxford reverses to 300D
• Oxford waterproof black lining
• • Waterproof taped seams, double layer reversible storm flaps, snap closures
• • Adjustable cuff with Velcro straps
• • Two slash pass through slits with Velcro closures on the side seams.
• • ID badge tab and microphone tab on left chest
• • Cell Phone Pocket on right chest
• • Detachable reversible hood
• • Color: lime shell, black lining
• • Sizes: XS-5X

Screen printing available please call for details

Men's lightweight jacket that's waterproof, breathable, and built to last.
This men's waterproof jacket is the difference between being uncomfortable in the rain and working right through it all. It's made of lightweight, breathable material that provides a seam-sealed barrier against the elements. There are three pockets on the outside as well as drop-in pockets on the inside.

Features:
5.4-ounce, 100% nylon shell; 10K / 5K waterproof breathable protection rating

Storm Defender® waterproof, breathable technology stops water from getting in but lets sweat get out

Two-layer membrane with Rain Defender® durable water repellent (DWR) keeps you dry and moving in light rain

Fully-taped, waterproof seams

Visor on hood for extra coverage; Adjustable cord lock on hood

Full-length zipper with outer and inner storm flaps

Hook-and-loop adjustable cuffs; Adjustable cord lock on hem

Chest pocket

Two lower front pockets with zipper closures and storm flaps

Interior drop-in pockets

• Fabric: 100% PU Coated polyester,
• 190gsm.300D Oxford weave with stain resistance.
• EN471 class 2:2.
• Waterproof.EN343 class 3:1.
• Lining: Nylon 60gsm/Wadding 170gsm.
• Quilt lined.Adjustable leg access.
• Elasticated back.
• Front pouch pocket.
• Mobile phone pocket.
• Adjustable straps.
• Reflective stripes.

WE CUSTOMIZE! -  call for information for printing names or logos on this product 

Wet weather shouldn't slow you down. The waterproof Propper Packable Waterproof Jacket fits over your clothing to keep water out – and keep you comfortable. Taped seams provide extra protection against the elements. Pack it into its own pocket and take it with you when skies are gray.

Features

• Taped seams for fully waterproof construction
• DWR (durable water repellent) finish
• Six pocket jacket design
• Windproof
• Zippered back pant pocket
• Fits over uniform
• Contoured hood with elastic to allow for greater visibility
• Pull-out ID or badge panel
• Dual zippered hand pockets
• 3.2 oz 100% nylon ripstop with DWR

Wet weather shouldn't slow you down. The waterproof Propper Packable Waterproof Jacket fits over your clothing to keep water out – and keep you comfortable. Taped seams provide extra protection against the elements. Pack it into its own pocket and take it with you when skies are gray.

Features

• Taped seams for fully waterproof construction
• DWR (durable water repellent) finish
• Six pocket jacket design
• Windproof
• Zippered back pant pocket
• Fits over uniform
• Contoured hood with elastic to allow for greater visibility
• Pull-out ID or badge panel
• Dual zippered hand pockets
• 3.2 oz 100% nylon ripstop with DWR

This Packable Waterproof Rain Jacket is 100% Rip-Stop Polyester (270t, 30d X 30d) with zipper closures featuring a storm flap with hook & loop closure and snap closures at the neck and waist for extra protection from the elements. In addition, the rain jacket features a drawstring hood that is adjustable with a rear hook & loop tab, a drawstring waist, wrist cuffs adjustable with hook & loop tabs, 2 front slash zippered pockets - mesh interior, vented back with mesh interior. The rain jacket will fold up and pack into the zippered chest pocket/pouch with quick release buckle and interior hook & loop fastens to keep flat when worn, when packed the pouch measures 8" x 5.5" x 3.5.

• Fully Quilt Lined for Added Warmth and Comfort
• Zipper Fly
• Side Leg Openings
• Cell Phone Pocket on Thigh
• 300D oxford weave

Made with tough 300 Denier 100% polyester yarn. This is a tough fabric for tough conditions. 300D fabric has superb abrasion and tear resistance. The polyurethane (PU) coating on the inside makes the fabric durable and waterproof, and the outer has a water and stain repellent coating which helps to keep the garment clean.

• 2 .5” silver reflective tape
• Back elasticated waist
• Fully quilt lined for added warmth and comfort
• Twin stitched seams
• Pockets: 1 thigh with 1 cell phone, 2 side and 1 back pocket
• Front zipper fly opening
• Side zipper leg opening for easy access
• Contrast panels for protection against dirt
• Waterproof with sealed seams
  
  

Shell: 100% Polyester, 300D Oxford Weave with a stain resistant finish, PU Coated , 5.5 oz
Lining: 100% Polyester , 2oz
Wadding: 100% Polyester , 5oz



Yellow/Navy S-3XL

• Meets ANSI/ISEA 107-2010 CLASS 3 Standard with 2” Reflective tape on arms & torso
• Black bottom at the front & cuffs to reduce staining
• Lime Green 300D Nylon Oxford with Waterproof PU coating and waterproof taped seams
• Removable hood tucks into the collar with draw string
• Full length storm flap with heavy duty zipper & snap front closures
• Two flapped front pockets with Velcro closures to secure valuables.
• Adjustable cuff with snaps
• 1 Mic-Tab & Badge holder
• Available Sizes: S-5X

Screen printing available please call for details

• Rothco's Poncho Liners with ties can provide warmth and comfort in mild temperatures when used with a poncho.
• The poncho liners can also be used as a sleeping bag or blanket.
• They are great for anyone planning to be outdoors for a long period of time and they fit great inside your Bug Out Bag!
• Poncho liners are also known as woobies.
• One Size Fits All

• Rothco's Poncho Liners include ties and provide warmth and comfort in mild temperatures when used with a poncho.
• The Poncho Liners can also be used as a sleeping bag or blanket
• They are great for anyone planning to be outdoors for a long period of time and they fit great inside your Bug Out Bag! .
• Military poncho liners are also know as a woobie.
• One Size Fits All

Perfect for DPW or Traffic Control or anyone who wants to stay visible and dry. Easy on over your clothes. 

Polyester 300D Oxford with Waterproof PU coating
• Meets ANSI Class E Standard with 2” wide reflective stripes
• Adjustable zippers on ankles for safety & comfort
• Available Sizes: S-5X
• Adjustable elastic suspenders with quick release buckles. Single Snap

• Screen printing available please call for details

Perfect for DPW or Traffic Control or anyone who wants to stay visible and dry. Easy on over your clothes. 

Polyester 300D Oxford with Waterproof PU coating

• • Meets ANSI Class E Standard with 2” wide reflective stripes
• • Adjustable zippers on ankles for safety & comfort
• • Available Sizes: S-5X
• • Two pass-through slits for front pocket access
• • Elastic & draw string on waist
• • Black bottom design to reduce the staining
• Screen printing available please call for details

Specifications:

• Material Specs: 100% Polyester, PU Coated
• Dimensions: 56" X 90"
• Closures And Fasteners: Snaps

Ranger Style Full Brimmed Hat

● ANSI-certified 150D oxford polyester
● Mesh venting around the crown of the head
● 1-Inch Level 2 ANSI-certified tape with 2" contrasting color 360° around the hat.
● Light Grey lining under hat and brim & silver piping around brim to promote visibility.
● Two sizes: S/M (22.5-Inch) , L/XL (24-Inch) around the crown
● Drawstring for secure fit.